Gepost op

Open-mesh update firmware 6.4.5 Stable release

Firmware 6.4

Latest Development Release

6.4.5 (23-02-18) is de vervangende versie voor 6.3.16 Open-Mesh gaat niet verder met 6.3 en maken van 6.4.5 een “stable release”

6.4.5 (Jan 8, 2018)

Fixes:

  • FIXED: Using the SSID Band setting “Both – Unique SSIDs”, results in the first character of each SSID name being truncated.
  • FIXED: AP may report N/A N/A for channels, despite broadcasting correctly.

Known Issues:

  • KNOWN ISSUE: Some clients may report being connected to the wrong band(e.g. 2.4Ghz instead of 5Ghz).
  • KNOWN ISSUE: Disabling Application Reporting breaks throttling on non-bridged SSIDs.
  • KNOWN ISSUE: “2.4Ghz only” and “5Ghz only” band setting may not be honored if another SSID is set to use the “Both – Combined SSID”. The AP may continue to broadcast both bands.
  • KNOWN ISSUE: Traffic for wired clients not reported when Application Reporting is turned off.
  • KNOWN ISSUE: IP address for wired clients not reported.
  • KNOWN ISSUE: The A42 802.3af port now uses the MAC address shown on the underside sticker, instead of the sticker MAC address +1. This results in a different MAC address being used for DHCP requests compared to 6.4.2/6.4.1.
  • KNOWN ISSUE: Removed IBSS meshing. Only 802.11s is supported, so 6.4.5+ firmware will no longer mesh with APs running 6.3 firmware.Previous Development Releases

    6.4.4 (Dec 27, 2017)

    New Features:

    • NEW: Unused splash page images are now deleted automatically from the access point when SSID settings are saved.
    • NEW: Bridge Loop Avoidance is now more aggressive to avoid looping scenarios on complex networks.
    • New: If AP Mesh is disabled, access point will reconfigure channel changes immediately.

    Fixes:

    • FIXED: Facebook WiFi would not pop-up automatically or would be displayed incorrectly on iOS and macOS devices.
    • FIXED: Clients w/ hostnames may cause malformed JSON, resulting in striped pattern on the outage graph due to check-in failure.
    • FIXED: External splash pages that worked in 6.3 firmware fail to work on 6.4 firmware due to internal CONN_ERR.
    • FIXED: SSIDs may fail to broadcast with WiFi Scheduling enabled.
    • FIXED: Disabled LED lights may turn back on after firmware upgrade.

    Known Issues:

    • KNOWN ISSUE: “2.4Ghz only” and “5Ghz only” band setting may not be honored if another SSID is set to use “Both – Combined SSID”. The AP may continue to broadcast both bands.
    • KNOWN ISSUE: Using the SSID Band setting “Both – Unique SSIDs”, results in the first character of each SSID name being truncated.
    • KNOWN ISSUE: Traffic for wired clients not reported when Application Reporting is turned off.
    • KNOWN ISSUE: IP address for wired clients not reported.
    • KNOWN ISSUE: AP may report N/A N/A for channels, despite broadcasting correctly.
    • KNOWN ISSUE: The A42 802.3af port now uses the MAC address shown on the underside sticker, instead of the sticker MAC address +1. This results in a different MAC address being used for DHCP requests compared to 6.4.2/6.4.1.
Deel nu: