Gepost op

Open-mesh update firmware 6.4.7 (April 11, 2018)

New:
  • NEW: Allow external splash page pre-authentication to be turned off. GUI coming soon.

Fixes:

  • FIXED: Enabling Band Steering may result in high processor load and/or client connection issues.

Known Issues:

  • KNOWN ISSUE: CloudTrax may incorrectly report some clients as having a 169.x.x.x IP address.
  • KNOWN ISSUE: Unblocked clients that were previously blocked via Manage -> Clients may remain blocked until reboot.
  • KNOWN ISSUE: 5Ghz Meshing always uses 80Mhz channel width, regardless of CloudTrax channel settings.
  • KNOWN ISSUE: Hostname reported via syslog might report as “lede”, instead of actual hostname.
  • KNOWN ISSUE: The A42 802.3af port now uses the MAC address shown on the underside sticker, instead of the sticker MAC address +1. This results in a different MAC address being used for DHCP requests compared to 6.4.2/6.4.1.

6.4.6 (Mar 12, 2018)

New:

  • NEW: Remote syslog server support.
  • NEW: Removed outdated crypto algorithms from SSH implementation.

Fixes:

  • FIXED: Some clients may report being connected to the wrong band(e.g. 2.4Ghz instead of 5Ghz).
  • FIXED: “2.4Ghz only” and “5Ghz only” band setting may not be honored if another SSID is set to use the “Both – Combined SSID”. The AP may continue to broadcast both bands.
  • FIXED: Disabling Application Reporting breaks throttling on non-bridged SSIDs.
  • FIXED: Some wireless repeaters may report 0 hops on large mesh networks.
  • FIXED: Some APs may stop reporting client traffic.
  • FIXED: Throttling does not work on non-bridged SSIDs with Application Reporting disabled.
  • FIXED: Captive portal may prevent client connections on busy networks due to not clearing its clients list when Application Reporting is disabled.
  • FIXED: Setting throttle to 100mbit/sec resulted in 10mbit/sec throttle.
  • FIXED: Auto channel mode may fail due to incorrect channel values reported by AP.

Known Issues:

  • KNOWN ISSUE: CloudTrax may incorrectly report some clients as having a 169.x.x.x IP address.
  • KNOWN ISSUE: Enabling Band Steering may result in high processor load and/or client connection issues.
  • KNOWN ISSUE: Unblocked clients that were previously blocked via Manage -> Clients may remain blocked until reboot.
  • KNOWN ISSUE: Hostname reported via syslog might report as “lede”, instead of actual hostname.
  • KNOWN ISSUE: The IP address of wired clients is not reported when Application Reporting is turned off.
  • KNOWN ISSUE: 5Ghz Meshing always uses 80Mhz channel width, regardless of CloudTrax channel settings.
  • KNOWN ISSUE: The A42 802.3af port now uses the MAC address shown on the underside sticker, instead of the sticker MAC address +1. This results in a different MAC address being used for DHCP requests compared to 6.4.2/6.4.1.
Deel nu: